×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

wlc wrong image dowload

Unanswered Question
Mar 21st, 2014
User Badges:

Good morning,

We have a customer with a 5508 controller running 7.4.110.0.  It has a backup image of 7.2.111.3.

When we added a 1242 access point to it recently the access point was offered the wrong image version: it was offered and downloaded 7.2.111.3 instead of 7.4.110.0. Naturally it downloaded and installed this version and rebooted - and then found that it had the wrong image version for the running image, so downloaded a new image...7.2.111.3 again...

When we connected the AP to a sister WLC it was offered the correct 7.4.110.0 image, downloaded it and after a reboot we could connect it fine to the original WLC.

Has anyone seen anything like this before or can anyone suggest why this might be.  I've attached the show boot from the WLC.

Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Thomas McClintic Fri, 03/21/2014 - 06:27
User Badges:

Robin,


Can you show the output of <samp>show ap image all</samp>

 

Also, can you try to join it again with debug lwapp events enable and show the output?

Actions

This Discussion