Any other suggestions apart from updating ?

I think this is the same server , LMS 3.1 ?

Try deleting and re-adding the device ,if that did not help . you have to update the RME device pacakges  or as I suggested in a previous post upgarde the LMS to atleast 3.2.1  ,if it is the same server.

Thanks-

Afroz

***Ratings Encourages Contributors ***

yes it is the same 3.1

Can you please provide the download link to LMS 3.21 , i can only find the link to evaluation version.

Will license file for 3.1 work on 3.2.1 ?

Can i Migrate the dabase of 3.1 to 3.2.1 (any link will be highly helpful)

Also which OS is required for 3.2.1 ? i remember tht 3.1 wasnt working on Windows 2008 R2 so have to install it on 2003 R2

Hi ,

You need to go on 3.2 fisrt. I did not find 3.2.1 on the cisco.com .

Installed 3.2 first and hope this will resolve many of the  issues you are facing:

here is the download link for 3.2 :

http://software.cisco.com/download/release.html?mdfid=282635181&flowid=16561&softwareid=280775102&os=Windows&release=3.2.0&relind=AVAILABLE&rellifecycle=&reltype=latest

yes the license for LMS 3.1 will work perfectly on LMS 3.2

Hardware should not be a problem:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/3-2/install/guide1/lmsigsg/prereq.html#wp1101012

NOTE: before you actually planned to upgarde , take the backup of LMS 3.1 and then start the upgarde.

For data migration , check the below link:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/3-2/data_migration/guide/lms32_dmg/dmg_win.html

Thanks-

Afroz

[Do rate the useful post]

***Ratings Encourages Contributors ***

Thanks Afroz , will try out this and post the result

Hi,

Upgraded to 3.2 , however i am receiveing DCR Server is down or inaccessible.

any suggestions ?

Thanks

Hi ,

share the below information:

output of pdshow

dcrserver.log

md.properties

regdaemon.xml and regdaemon.xml.bck

ctm_config.txt file from below location :

NMSROOT\\CSCOpx\\MDC\\tomcat\\webapps\\cwhp\\WEB-INF\\lib

NMSROOT\\CSCOpx\\MDC\\tomcat\\shared\\lib

Thanks-

Afroz

Hi ,

Cudn't get pdshow output , text file is generated without any result , meanwhile i am attaching other required details

Hi ,

ERROR: Certificate Date Invalid
java.security.cert.CertificateNotYetValidException: NotBefore: Thu Apr 10 12:05:14 PDT 2014

certificate seems to be invalid ..

Regenerate the SSL certificate as below ::

To generate a new certificate in LMS

1. Stop the daemon Manager

net stop crmdmgtd

1. Remove the following certificate files from (NMSROOT/MDC/Apache/conf/ssl)

a. server.crt

b. server.key

c. server.pk8

d. server.csr

2. Disable SSL:

NMSROOT\CSCOpx\bin>perl "NMSROOT\CSCOpx\MDC\Apache\ConfigSSL.pl" -disable

3. Enable SSL to generate certificate:

NMSROOT\CSCOpx\bin>perl "NMSROOT\CSCOpx\MDC\Apache\ConfigSSL.pl" -enable

4. Start Daemon Manager

net start crmdmgtd

Also change the last line in the ctm_config.txt file , it should have 2 back slash:

REGISTRY_LOCATION=C:/PROGRA~2/CSCOpx//MDC/tomcat/webapps/triveni/WEB-INF/lib

it should be

REGISTRY_LOCATION=C://PROGRA~2//CSCOpx//MDC//tomcat//webapps//triveni//WEB-INF//lib//

Thanks-

Afroz

***Ratings Encourages Contributors ***

Thanks AFroz,

i did all the steps , started the daemon , restarted the server as well as i am getting the following error

Forbidden

You don't have permission to access /cwhp/LiaisonServlet on this server.

Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.

You are using 443 or 1741  ?

as ssl is enable , use the port no . 443

if above is not working . Just disable the SSL once and then try login with 1741

steps:

1. Stop the daemon Manager

net stop crmdmgtd

2. Disable SSL:

NMSROOT\CSCOpx\bin>perl "NMSROOT\CSCOpx\MDC\Apache\ConfigSSL.pl" -disable

4. Start Daemon Manager

net start crmdmgtd

Thanks-

Did the same thing ,i was using 1741 

disabled SSL and restarted Daemon , again got back to DCR error

DR Server Process status is "Waiting to Initialize"

hi ,

ctm_config.txt file from below locations :

NMSROOT\\CSCOpx\\MDC\\tomcat\\webapps\\cwhp\\WEB-INF\\lib

NMSROOT\\CSCOpx\\MDC\\tomcat\\shared\\lib

send both the files from the above location.

and dcrserver.log and dcr.log

Thanks-

Afroz