×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

IOS Upgrade Cisco 4506

Unanswered Question
Mar 25th, 2014
User Badges:

Hi all

I have a Cisco 4506 with supervisor module II WS-X4013+, this one have the version IOS cat4000-i9s-mz.122-18.EW3.bin, but i want enable SSH So i need upgrade the IOS version, Can anyone help me with a suggestion of IOS for this equipment?

 

Thank you.

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Tue, 03/25/2014 - 14:11
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

No one is irresponsible for giving you a recommended IOS version based on the limited amount of information you've provided.  We don't know what line cards you've got, we don't know what your network is like, and we don't know how you've done your configuration.  

 

Your best method is pick an IOS which is suitable to your supervisor card, line cards and chassis and read the Release Notes.  TEST the IOS you've choosen before implementing this in your network.

carlos_munozc Wed, 03/26/2014 - 09:17
User Badges:

Below the info of each module, also this switch has been configured with OSPF

sh bootflash:
-#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name
1   .. image        A5C615FB  A18334   29 10322612 May 17 2005 17:41:40 +00:00 cat4000-i9s-mz.122-18.EW3.bin

sh module
Chassis Type : WS-C4506

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
 1     2  Supervisor II+ 1000BaseX (GBIC)     WS-X4013+                   JAE0921D09Q
 2    24  10/100/1000BaseT (RJ45)                WS-X4424-GB-RJ45   JAB06430AB1
 3    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE0920CV75
 4     6  1000BaseX (GBIC)                              WS-X4306-GB             JAE074706LH
 5    24  10/100/1000BaseT (RJ45)                WS-X4424-GB-RJ45   JAB060705PM
 6    24  10/100/1000BaseT (RJ45)                WS-X4424-GB-RJ45   JAB0629052P

thank you.

glen.grant Wed, 03/26/2014 - 10:37
User Badges:
  • Purple, 4500 points or more

    I don't think ospf was ever officially supported on a Sup2 plus supervisor.  I think you have one of the old versions where cisco did not pull out the commands but it was not supported .  It is possible if you go to something newer ospf may disappear so you might want to look for the K9 version of the IOS you are currently using .

glen.grant Tue, 03/25/2014 - 14:18
User Badges:
  • Purple, 4500 points or more

  I would pick a  late version 12.2  version .  The image must have a K9 in the imagename to support ssh.

Actions

This Discussion