×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Problem Cisco AIR-LAP1131AG-E-K9 Ethernet LED = Off; Radio LED = RED ; Status LED = RED ;

Unanswered Question
Mar 26th, 2014
User Badges:

hi,

I have a Cisco AIR-LAP1131AG-E-K9 when I boot one accesspoint it gives  Ethernet LED = Off; Radio LED = RED ; Status LED = RED  and only next listing in the screen:

Xmodem file system is available.

Flashfs[0]: unable to allocate available block.

 

The system has been interrupted, or encountered an error during initializion of the flash filesystem.

The foolowing commands will initialize the flash filesystem, and finish loading the operating system software:

 

flash_init

ether_init

tftp_init

boot

 

When I type this commands, it doesn't help at all. The output will be following:

 

ap: flash_init

Initializing Flash...

flashfs[0]: out of memory

...done Initializing Flash.

 

ap: ether_init

Initializing ethernet port 0...

Reset ethernet port 0...

Reset done!

 

ap: tftp_init

Unable to get our ip address: no "IP_ADDR" variable set

 

ap: boot

Loading ""...; permission denied

 

Error loading ""

 

Interrupt within 5 seconds to abort boot process.

Boot process failed...

 

ap:

 

what i do ?  please help , thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode