We have a cisco 6509 with a 1gb link to an ASR1004 utilizing OSPF. This link is heavily congested and we would like to link agg or port channel another 1gb link. Are there any caveats with OSPF on LACP? Will BFD need to be disabled?
I've attached the two interface configs from both 6509 and ASR.
6509
!
interface GigabitEthernet4/45
description ASR1004A
ip address 10.254.254.14 255.255.255.252
ip nat outside
ip ospf bfd
bfd interval 150 min_rx 150 multiplier 3
end
ASR
!
interface GigabitEthernet1/0/2
description gw6509-1
ip address 10.254.254.13 255.255.255.252
ip ospf bfd
load-interval 30
negotiation auto
bfd interval 150 min_rx 150 multiplier 3
end
Thanks in advance
Rob