×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ASA 5505 NAT config with 9.0 version

Unanswered Question
Mar 31st, 2014
User Badges:

 

I have a issue with NAT in ASA 5505 version 9.0 firewal.

1. I have one web server on LOCAL LAN  in ASA firewall with private ip  address. Web application is running on webserver, and I can access this  web application with private ip address from web server itself, But I am  not able to access web application with public NATed ip address(NATED  in ASA firewall) from web server itself.

 

2. From the outside of the firewall the web server application is accessible with public ip address.

 

Public ip 103.15.62.X and server ip 10.0.0.10 please suggest the config with version 9.3 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
lcambron Mon, 03/31/2014 - 11:35
User Badges:
  • Bronze, 100 points or more

Hello,

 

Try this:

 

object network obj-103.15.62.X 

host 103.15.62.x

object network obj-10.0.0.10

host 10.0.0.10

nat (inside,inside) source dynamic any interface destination static obj-103.15.62.X obj-10.0.0.10

 

Regards,

 

Felipe.

 

 

Remember to rate useful posts.

Actions

This Discussion