cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
562
Views
0
Helpful
3
Replies

upgrading ASDM

garyrivers
Level 1
Level 1

i'd like to upgrade my ASDM but if i remember correctly both the ASA and ASDM have to have the same versions.

I pulled the following off of my ASA5505

Cisco Adaptive Security Appliance Software Version 8.4(4)
Device Manager Version 6.4(9)

Compiled on Mon 21-May-12 10:48 by builders
System image file is "disk0:/asa844-k8.bin"
Config file at boot was "startup-config"

 

any thoughts or advice?

 

Thanks, Gary

1 Accepted Solution

Accepted Solutions

ksledge75
Level 1
Level 1

Hi Gary,

 

ASDM version and ASA IOS don't necessarily have to be the same.

 

Here is a link to a matrix which lets you know which ASDM version you need to correspond with whatever version of IOS you have

 

http://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html

 

This should get you going. Also Java is very picky on the PC when trying to get your client launched so here is link to a blog I used to help get my IE and Java settings just right

 

http://www.tpateman.co.uk/reboot/cisco-asa-5505-asdm-access-with-java-7/

 

 

Hope this helps

 

Kelvin

View solution in original post

3 Replies 3

ksledge75
Level 1
Level 1

Hi Gary,

 

ASDM version and ASA IOS don't necessarily have to be the same.

 

Here is a link to a matrix which lets you know which ASDM version you need to correspond with whatever version of IOS you have

 

http://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html

 

This should get you going. Also Java is very picky on the PC when trying to get your client launched so here is link to a blog I used to help get my IE and Java settings just right

 

http://www.tpateman.co.uk/reboot/cisco-asa-5505-asdm-access-with-java-7/

 

 

Hope this helps

 

Kelvin

thanks for the advice!!

yeah, the java thing.....i ended up uninstalling the latest java versions and kept version 6.

i think i'm going to attempt to upgrade the ASA and see what happens!

 

Thanks for your help!

Marvin Rhoads
Hall of Fame
Hall of Fame

What Kelvin said. :)

I would add that, unless you have ASA 7.x code, go ahead and load the current ASDM as noted on the Cisco matrix. That's ASDM 7.1(6) as of this writing.

Review Cisco Networking products for a $25 gift card