04-21-2014 10:32 AM - edited 03-16-2019 10:31 PM
I have a total of three PRIs connected to my Voice Gateways. Two of them are listed as MGCP and one is H.323. As we aren't doing any video that I am aware of, I question the need for this PRI. Are there any handy commands that show the utilization of a PRI? Is there any other reason to need a H.323 PRI?
04-21-2014 11:06 AM
For MGCP PRI's you will need to pull PRI utilization from RTMT. For H323 PRIs, you could issue "show isdn status" to see the number of active Layer 3 calls.As far as a reason for 1 to be H323 and the other to be MGCP, will be difficult to comment without knowing your network.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/7_1_2/rtmt/RTMT/rtpmcm.html#wp1012748
06-24-2014 03:29 PM
Best I can tell is the H.323 was ordered at a later time that the MGCP. Long term, I want to convert it all to SIP. I guess I have to track the active layer 3 calls via Cacti or something. Not sure how to get the MGCP data just yet. Any decent MIBs for this stuff?
06-26-2014 01:16 AM
You can use the Gateway Utilization Report that are generated under "CDR Analysis and Reporting" for PRI utilization.
Suresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide