×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Autonomous & Capwap image

Unanswered Question
Apr 23rd, 2014
User Badges:

Hello,

I have loaded k9w7 & k9w8 images into the flash of 1552H outdoor accesspoint from ap: mode using "tar -xtract tftp:" back to back.

Now my requirement is, whenever i want to switch to lwap or standalone mode, i just go to ap: mode and set boot as k9w7/k9w8 image and boot.

So that it will boot as lwap mode or standalone mode without the need of transferring again into the flash.

Here i uploaded both the images into flash and first booted with lwap image(k9w8). Then i wanted to boot with standalone image(k9w7). so i went to ap: mode and typed boot flash:/<dir name>/<file of k9w7>.

It shows,

Loading "flash:/...." ...####

File "flash:/..."

It still boots with the k9w8 only.

 

 

Can anyone tell me how to do it.?

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Prasan Venky Wed, 04/23/2014 - 01:42
User Badges:

Error is

Loading "flash:/c1520-k9w7-mx.152-4.JB4/c1520-k9w7-xx.152-4.JB4"...Bootable image segment 0 address range [0x3000, 0x1d0d1f8] not in range.


 

Actions

This Discussion