Hello,

I have loaded k9w7 & k9w8 images into the flash of 1552H outdoor accesspoint from ap: mode using "tar -xtract tftp:" back to back.

Now my requirement is, whenever i want to switch to lwap or standalone mode, i just go to ap: mode and set boot as k9w7/k9w8 image and boot.

So that it will boot as lwap mode or standalone mode without the need of transferring again into the flash.

Here i uploaded both the images into flash and first booted with lwap image(k9w8). Then i wanted to boot with standalone image(k9w7). so i went to ap: mode and typed boot flash:/<dir name>/<file of k9w7>.

It shows,

Loading "flash:/...." ...####

File "flash:/..."

It still boots with the k9w8 only.

Can anyone tell me how to do it.?