ā04-24-2014 01:21 AM
Cisco UCS 5108 warning alarms generated in UCSM
code="F0207"
created="2013-10-04T08:30:32"
descr="Adapter host interface 1/1/1/2 link state: down"
dn="sys/chassis-1/blade-1/adaptor-1/host-eth-2/fault-F0207"
highestSeverity="major"
id="410895"
ā04-25-2014 09:40 AM
Hello,
Is this a server that was already working or this is happening during the association process? What is the IOM model and blade model?
Could you please provide an screenshot of the IOMs backplane ports and Fabric ports?
Also, please provide an screenshot of BIOS, Adapter and CIMC firmware?
Last, what is the UCSM, Fabric Interconnects and IOMs firmware running?
-Kenny
ā07-12-2016 09:23 PM
Hi Kenny,
I am hitting similiar issue and have tried re-acknowledging the blade but issue didnt fix.
Any idea what could cause the issue?
Infrastructure and blade upgrade was done from ver - 2.2(c) to 2.2(7B)
ā07-13-2016 11:07 PM
Can you please post the screenshots Kenny was mentioning above !
ā07-14-2016 12:02 AM
ā07-14-2016 01:28 AM
Do I understand you correctly ? this happened after to upgrade to 2.2.7b ?
- did you manual or autoinstall ?
- do have blades that work ok, or are all blades in all chassis have this problem ?
- are the links from the fabric interconnect to the North bound switches up ?
- is the OS which shows this errors booted up ?
ā08-11-2016 06:57 AM
Hi Walter,
i have raised TAC case for this. Fix was to decommissioned the server so the UCSM cleared the information regarding this server and then recommissioned the server again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide