×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco Wireless Controller 2100 and CAP16021

Unanswered Question
Apr 26th, 2014
User Badges:

Dears,

One of our customer is having a Cisco AIR-WLC2112-K9 , we purchased an AP AIR-CAP16021-C-K9 , based on the supplier recommendation ,

As I understand , CAP16021x Series require a Wireless Controller with firmware 7.4.x and above where as Cisco 2112 can be last updated to 7.0.,

Is there a workaround available ,

In dire need of help and support,

Hasan Reza

 

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ISHANT VARSHNEY Sat, 04/26/2014 - 08:24
User Badges:
  • Cisco Employee,

Hi Hasan,

1600 APs need minimum of 7.4 software on WLC and there is no way we can upgrade 2112 WLC to 7.4 code.

Only way to get 1600 AP register to WLC is to get a WLC which supports software 7.4 like 5508, 2504, WISM etc.

 

HTH.

 

Thanks & Regards,

Ishant

*** Please rate the post if you find it useful ***

Scott Fella Sun, 04/27/2014 - 07:55
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Just to add, keep this matrix handy for future use. This explains all the compatibility for Cisco wireless: http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compa... Please rate helpful post and Cisco Support Community will donate to Kiva Scotty
Leo Laohoo Sun, 04/27/2014 - 17:28
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

The only work-around is to convert the APs to autonomous IOS.

Actions

This Discussion