cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1143
Views
0
Helpful
5
Replies

Catalyst WS-3850 model question

Mingyao Xu
Level 1
Level 1

Hi guys, is there any model with all SFP 1G port within Catalyst 3850 series, similar with WS-C3750X-12S-E ....

 

Thank you !

5 Replies 5

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

3850 series models are all copper.  If you need one with fiber interfaces, you would need to go 3750X, (as you already know).

HTH

Marvin Rhoads
Hall of Fame
Hall of Fame

The best you can do on a 3850 is 4 x 1 Gbps SFPs in the optional C3850-NM-4-1G network module.

Besides the 3750X you mentioned, you could also move up to a 4500X which is all SFP-based. That's a much more capable switch though and will take you up a tier in price.

abw
Level 1
Level 1

Leo Laohoo
Hall of Fame
Hall of Fame

The 3850-12S/24-S was released to the public a few days before Cisco Live SF 2014.  

 

Please note that the modular uplinks are only 1 Gbps for the time being.  The 10 Gbps uplink will be made available by the end of 2014.  

 

Also note that if you are going to use or add this model to an exhausting stack you need to factor in the minimum required software to support this model. 

Richard Primm
Cisco Employee
Cisco Employee

Vincent,

 

Please see https://www.cisco.com/c/dam/en/us/products/collateral/switches/catalyst-3850-series-switches/at-a-glance-c45-731636.pdf

 

  HTH 

Luke

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card