Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Wireless outdoor with AIR-CAP1552SA-A-K9 ?

Unanswered Question
May 2nd, 2014
User Badges:

Dear all,


Currently i plan to install wireless outdoor, from my office to 8 destination. and from office to each destination around 500m to 1K and i need to use function Bridge with AP mean that all 8 destination connection to office by bridge function and my client use function AP. my question is:

1- Does Cisco AIR-CAP1552SA-A-K9  support bridge and AP the same time? i mean that AP to AP and AP to client.

2- Should we use stand along without controller?

3- What type of Antenna(dmi) support up to 1K AP to AP and AP to clinet?


Best Regards,




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
rechard_hk Tue, 06/17/2014 - 02:29
User Badges:

Dear all,


Any command on this?


Best regards,


Moin Ilyas Thu, 07/10/2014 - 02:56
User Badges:
  • Bronze, 100 points or more

Yes, you can use 5GHz Radio for Wireless Backhaul and 2.4GHz Radio for Clients.
Please refer Network Deployment Examples: http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1550/quick/gu...

The 1550 Series Access Points can only communicate with controllers and cannot operate independently in standalone mode.

For Antenna, please refer: http://www.intermec.com/public-files/product-profiles/en/CiscoAntennasAc...


This Discussion