1522 Outdoor Access Point Clarification

Answered Question
May 9th, 2014
User Badges:

Dear Folks, 


One of our client requires Outdoor Access Points across the campus, UTP outdoor cable would be provided. 

I would like to clarify the following points
 
1. Does the Standard model 1522 Access Point support POE that can take direct from POE Switch or is POE injector mandatory ? 

2. Is mounting kit included or ordered extra ? 

Appreciate your kind help and support . 

Regards, 

SID

Correct Answer by Leo Laohoo about 3 years 3 months ago

Outdoor APs require injectors.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Leo Laohoo Fri, 05/09/2014 - 01:07
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Outdoor APs require injectors.

ciscokid7181 Fri, 05/09/2014 - 01:23
User Badges:

Thanks, 

If i purchase this unit, does it come along with the power cable and adaptor ? As i dont see in the configurator / datasheet , i assume it is built in . 

Regards, 

SID

 

Scott Fella Fri, 05/09/2014 - 09:02
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

You can find the part numbers here:

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1130-a...

Please rate helpful post and Cisco Support Community will donate to Kiva

Scotty

Scott Fella Fri, 05/09/2014 - 09:04
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Typically you would hard wire the power to the units that are considered MAP's, or the AC adapter.  The RAP's typically would have a power injector to power that unit up.

Please rate helpful post and Cisco Support Community will donate to Kiva

Scotty

Actions

This Discussion