×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How to restore a Cisco 1841

Unanswered Question
May 9th, 2014
User Badges:

Hi guys,

to reset a cisco 1841 tofactory settings, we enter in rommon interface and by mistake we used confreg 0x024 instead of 0x2142.

After the reboot I'm not able to read the carachters, looks like to be on wrong serial speed, but it isn't.

Do I need to trash it ?

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
SANTHOSHKUMAR S... Fri, 05/09/2014 - 07:23
User Badges:
  • Silver, 250 points or more

 

Hi ,

 Try with different console speed . You should be able to see the characters .

http://www.cisco.com/c/en/us/td/docs/routers/access/1800/1841/software/configuration/guide/sw/b_creg.html#wp40498

Table 4 Console Line Speed Configuration Register Bit Combinations 

Bit 5
Bit 11
Bit 12
Console Line Speed (baud)

1

1

1

115200

1

0

1

57600

1

1

0

38400

1

0

0

19200

0

0

0

9600

0

1

0

4800

0

1

1

2400

0

0

1

1200

 

 

HTH

Sandy 

 

Actions

This Discussion

Related Content