Cisco 1941 Router

Unanswered Question
May 20th, 2014
User Badges:

I am working with a customer with a Cisco 1941 Router, we have internet traffic, but we cannot get their email or http traffic through to their servers.

 

gis server - 67.231.65.229  needs to be accessible from www

email server - 67.231.65.227  needs inbound and outbound email traffic

datatest server - 67.231.65.230

 

TVC_TOS#sh run

Building configuration...

 

Current configuration : 1877 bytes

!

! Last configuration change at 21:18:51 UTC Mon May 19 2014 by tsummers

! NVRAM config last updated at 21:05:06 UTC Mon May 19 2014

! NVRAM config last updated at 21:05:06 UTC Mon May 19 2014

version 15.2

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname TVC_TOS

!

boot-start-marker

boot-end-marker

!

!

enable password 7 XXXXXXXXXXXXXXXXX

!

no aaa new-model

!

ip cef

!

!

!

!

!

!

ip domain name tvcconnect.net

ip name-server 64.72.64.10

ip name-server 8.8.8.8

no ipv6 cef

multilink bundle-name authenticated

!

!

!

license udi pid CISCO1941/K9 sn FGL172021GD

!

!

username cisco privilege 15 password 7 XXXXXXXXXXXXXXXXXX

username tsummers privilege 15 password 7 XXXXXXXXXXXXXXXXXXXX

!

!

!

!

!

!

interface Embedded-Service-Engine0/0

no ip address

shutdown

!

interface GigabitEthernet0/0

description To TOS Firewall

ip address 67.231.65.236 255.255.255.240

ip nat inside

ip virtual-reassembly in

duplex auto

speed auto

!

interface GigabitEthernet0/1

no ip address

shutdown

duplex auto

speed auto

!

interface GigabitEthernet0/0/0

description TVC to TOS Interfeace

ip address 67.231.65.98 255.255.255.252

ip nat outside

ip virtual-reassembly in

rate-limit output 10000000 1875000 38750000 conform-action transmit exceed-action drop

!

ip forward-protocol nd

!

no ip http server

no ip http secure-server

!

ip nat inside source list 1 interface GigabitEthernet0/0/0 overload

ip route 0.0.0.0 0.0.0.0 67.231.65.97

!

access-list 10 permit any

!

!

!

control-plane

!

!

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Martin Carr Tue, 05/20/2014 - 11:34
User Badges:

You need to use PAT to forward the respective traffic to the servers.

 

Martin

 

Actions

This Discussion