×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

4500X temperature

Unanswered Question
May 20th, 2014
User Badges:

Hi there,

I have a 4500-X switch in VSS and i see that some of it's temperatures are above 50 Celsius degrees.

Is that normal ? if not, what are the normal values ?

 

This is the message i am receiving:

Notification: PROBLEM


Host: sw-zahav-jr-4500X-it.zahav.it.jr [SNMPv2-MIB::sysDescr.0 = STRING: Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.04.00.SG RELEASE SOFTWARE (fc3)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2012 by Cisc]
Address: 10.201.0.15
Service: CISCO TEMPERATURA V2
State: WARNING

Information: WARNING - Temperatures:[39] [42] [45] [51] [40] [43] [47] [52] [39] [29]

Regards,

Alon Haber 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion