I already have configured those parameters, but what I need is a simple WPA password authentication, and those options always take me to the radius configuration somehow... can be done? what I want? configure wpa like a normal AP?

you need to configure static WEP with static key

http://networking-newbie.blogspot.com/2008/11/configuring-wpa-and-wpa2-on-cisco.html

or

check this link for command line configuration

http://networking-newbie.blogspot.com/2008/11/configuring-wpa-and-wpa2-on-cisco.html

Note:

donot select this it mean different here

WPA—Wi-Fi Protected Access (WPA) permits wireless access to users authenticated against a database through the services of an authentication server and encrypts their IP traffic with stronger algorithms than those used in WEP. As with EAP authentication, you must enter the IP address and shared secret for an authentication server on your network (server authentication port 1645).

Hi guys, I apologize for my late response, I figured out how to configure the AP, I will share the configuration when I get home.

Hi guys, I apologize for my late response, I figured out how to configure the AP, I will share the configuration when I get home.

Hi guys, I apologize for my late response, I figured out how to configure the AP, I will share the configuration when I get home.