05-21-2014 07:33 AM - edited 07-05-2021 12:52 AM
I'm tconfiguring a new Aironet 1142 wireless access point with the web
configuration utility. I only need a simple single SSID, no VLANs, and a
WPA2 autentication password (I can't let it with a 128 bits wep password
because the ap is for normal random users). The thing is that when im
configuring the wpa it ask me for a radius server... and I just need a
simple access point. If you guys can help me with the cli or web configuration
I'll be grateful
05-21-2014 07:56 AM
Do check this guide its a basic config guide as required
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html
***********Do rate helpful links************************
05-21-2014 08:13 AM
I already have configured those parameters, but what I need is a simple WPA password authentication, and those options always take me to the radius configuration somehow... can be done? what I want? configure wpa like a normal AP?
05-21-2014 08:44 AM
you need to configure static WEP with static key
http://networking-newbie.blogspot.com/2008/11/configuring-wpa-and-wpa2-on-cisco.html
or
check this link for command line configuration
http://networking-newbie.blogspot.com/2008/11/configuring-wpa-and-wpa2-on-cisco.html
Note:
donot select this it mean different here
WPA—Wi-Fi Protected Access (WPA) permits wireless access to users authenticated against a database through the services of an authentication server and encrypts their IP traffic with stronger algorithms than those used in WEP. As with EAP authentication, you must enter the IP address and shared secret for an authentication server on your network (server authentication port 1645).
05-22-2014 02:59 PM
Hi,
What type of security do you want to use?
PSK (preshared key,just a static password) or 8021.X authentication?
Regards
09-02-2014 11:54 PM
Hi,
Configure your AP as autonomous AP and then select the security mode WPA-Personal instead of WPA-Enterprise.
09-16-2014 11:15 AM
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap10-cipherwep.html
12-03-2014 02:26 PM
Hi guys, I apologize for my late response, I figured out how to configure the AP, I will share the configuration when I get home.
09-17-2014 04:27 AM
12-03-2014 02:25 PM
Hi guys, I apologize for my late response, I figured out how to configure the AP, I will share the configuration when I get home.
09-18-2014 06:44 PM
Refer the autonomous confg. from
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html#wp33244
12-03-2014 02:25 PM
Hi guys, I apologize for my late response, I figured out how to configure the AP, I will share the configuration when I get home.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide