Hi,

I have a SM-32A module installed in slot 1 in a Cisco 3925 router to act as a terminal server providing reverse telnet sessions to various other device console ports. My understanding is that the ports on the SM-32A are referenced as "slot/port" - in my case 1/0-31. The terminal server L0 address is 100.1.1.1 What I cannot determine is do I need to configure an ip host table with conventional port numbers to facilitate connections e.g.

ip host R 2000 100.1.1.1

ip host R1 2001 100.1.1.1

ip host R3 2003 100.1.1.1

ip host R31 2031 100.1.1.1

If so, are the port numbers 2000 to 2031 or is another convention used?

Many thanks.

Ed