×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

AVC, Netflow and Flexconnect APs

Unanswered Question
May 29th, 2014
User Badges:

Hi all,

 

I have few questions - if anybody was solving the same problem.

My situation : few branches with Flexconnect APs (in every of them). APs are set for some SSIDs as locally switched (to save WAN connectivity) and some are centrally switched. WLC code 7.4.

 

I was very looking forward to implement AVC. AVC works fine but only on centrally switched SSID - this is a big problem.

 

Is there any chance how to export traffic info for locally switched SSID?

I was wondering if LAP can serve as Netflow source (when I'm unable to see AVC data)?

 

Any idea?

 

Thnx

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Sandeep Choudhary Thu, 05/29/2014 - 02:17
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Wireless

HI,

First: AVC will not work if  you have locally swicthed.

if you checked the local switching under the SSID, then the AP will handle the traffic on its own, without sending the packets to the WLC, hence the WLC does not know what the users are using.

2nd : http://mrncciew.com/2013/02/12/configuring-netflow-on-wlc-7-4/

 

Reagrds

Pavel Pokorny Thu, 05/29/2014 - 03:30
User Badges:

Hi,

 

Thnx for link, know this site.

But, I'm afraid when local switching is in action, then Netflow export from WLC will not show locally switched traffic - for the same reason as AVC. Or am I wrong?

 

Thnx

Sandeep Choudhary Thu, 05/29/2014 - 03:32
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Wireless

AS per my knowledge: yes you are right. Its not possible.

 

Regards

Dont forget to rate helpful posts

Actions

This Discussion

 

 

Trending Topics - Security & Network