im just trying to convert an AP to autonmous mode, following the guide here https://supportforums.cisco.com/document/71501/installing-autonomous-ios...
i have issued the "debug capwap client no-reload" command but the ap is still failing about half way through and does this
%CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.OOO
*Mar 1 00:06:34.255: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
anyone know how to stop it?
i have also tried the holding mode button method, this fails and i have also tried the rommon set IP_ADDR... method, this also fails
Thanks for any advice