×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Scansafe on Router - Commands missing

Unanswered Question
Jun 10th, 2014
User Badges:
  • Bronze, 100 points or more

Hi,

Reading the document here - https://supportforums.cisco.com/document/147696/ios-scansafe-step-step-configuration

 

It states the following -

Prerequisite:

ISR should be running a minimum code version 15.2(1)T1 or above.

Available in IOS (universal) images with security feature set (SEC) license.

 

I am running the following - System image file is "usbflash0:c1900-universalk9_npe-mz.SPA.152-4.M4.bin"
 

But cannot see the following command - parameter-map type content-scan global

 

All I have available is

VPN(config)#parameter-map type ?
  waas  WAAS Parameter Map

 

Am I missing something?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Michael Douglas Wed, 06/18/2014 - 02:12
User Badges:
  • Cisco Employee,

Hello,

 

to you have the Security k9 bundle on ISR-G2?

 

Did you also try the most recent image 15.3(3) M3?

 

Regards,

Michael

Actions

This Discussion