cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4948
Views
5
Helpful
5
Replies

%HWIC_HOST-1-RX_CRC_ERROR: HWIC_HOST: Host termination logic experienced an HWIC CRC error for Interface

Asim Afzal
Level 1
Level 1

Hi,

 

we observe errors logs on the router as below ,please check and update if its trouble issue or abnormal behavior as we dont see any Services interuppted in the router currently.


Jun 17 06:18:57.208: %HWIC_HOST-1-RX_CRC_ERROR: HWIC_HOST: Host termination logic experienced an HWIC CRC error for Interface Descriptor Block 0x30A5F9A0
Jun 17 06:19:08.632: %HWIC_HOST-1-RX_CRC_ERROR: HWIC_HOST: Host termination logic experienced an HWIC CRC error for Interface Descriptor Block 0x30A5F9A0
Jun 17 06:19:09.452: %HWIC_HOST-1-RX_CRC_ERROR: HWIC_HOST: Host termination logic experienced an HWIC CRC error for Interface


LS-EMAX-LAMCY-MPLS uptime is 18 weeks, 21 hours, 38 minutes
System returned to ROM by power-on
System restarted at 08:52:33 UTC Mon Feb 10 2014
System image file is "usbflash0:c1900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload

LS-EMAX-LAMCY-MPLS#
NAME: "CISCO1921/K9 chassis", DESCR: "CISCO1921/K9 chassis"
PID: CISCO1921/K9 , VID: V05 , SN: FCZ1652902A

NAME: "Enhanced High Speed WAN Interface Card-1 Port Gigabit Ethernet SFP/Cu on Slot 0 SubSlot 0", DESCR: "Enhanced High Speed WAN Interface Card-1 Port Gigabit Ethernet SFP/Cu"
PID: EHWIC-1GE-SFP-CU , VID: V01, SN: FOC16486ADD

 

1 Accepted Solution

Accepted Solutions

Ankur Arora
Level 1
Level 1

Hi,

Its indeed the bug CSCuo71154

https://tools.cisco.com/bugsearch/bug/CSCuo71154/?reffering_site=dumpcr

There is no release where the bug is fixed at the moment, though there is a workaround by enabling flow control.

 

Thanks

 

"Please rate the post if found useful"

View solution in original post

5 Replies 5

acampbell
VIP Alumni
VIP Alumni

Hi,

Looks like you are hitting bug CSCuo71154
This bug is as yet unresolved

Raise a TAC case and let Cisco know your IOS is affected
by the bug.

They may have a special release of IOS code for you to
use.

Hope this helps
Regards
Alex

Regards, Alex. Please rate useful posts.

Thanks guys,

 

Let me do work around and will check

 

Thanks

Hi Asim, I have hit the same issue which I have reported out to TAC however can you please let me know what you workaround was which you mentioned?

Hello

Can someone update, if the IOS upgrade resolved this issue?

Thanks

Ankur Arora
Level 1
Level 1

Hi,

Its indeed the bug CSCuo71154

https://tools.cisco.com/bugsearch/bug/CSCuo71154/?reffering_site=dumpcr

There is no release where the bug is fixed at the moment, though there is a workaround by enabling flow control.

 

Thanks

 

"Please rate the post if found useful"

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco