06-19-2014 04:56 AM - edited 03-07-2019 07:46 PM
I am having issues with Catalyst 2960 Switch Console. Switch boots up fine and the process shows up on the console. But after the boot-up, console stops responding. It also does not respond to Break sequence at the boot-up. Any solutions? I am using Putty with 9600 8n1 settings.
Thanks
Hassan
06-19-2014 03:09 PM
Is Flow Control OFF?
06-19-2014 09:03 PM
I have tried with all settings of flow control, but still no use.
06-20-2014 05:26 AM
If you see the boot (POST) process on console and then it freezes once booted, then it's probably a baud mismatch in the startup-config.
06-19-2014 11:24 PM
Welll - the cosole hangs .. what about traffic flow, is it flowing or stopped ?
are the console settings correct at connecting node ?
-
Parvesh
Remember marking helpful posts.
06-20-2014 12:02 AM
Traffic is flowing. It just does not accept input from console. Although it shows output from switch in console like when interface goes up or down. And console settings on switch are default. Console was responding fine, it just stopped working out of blue.
06-20-2014 01:57 AM
Check the settings:
Please confirm if it helps
--
Parvesh
Remember marking helpful posts.
06-20-2014 02:10 AM
yeah i have tried these settings, but still not working
06-20-2014 04:23 AM
have you tried rebooting ?
try switching to a different application putty etc.
06-20-2014 04:26 AM
yeah multiple times. it boots fine and booting process shows up on console. After that console does not respond
06-20-2014 06:57 AM
Are you accessing the console over RDP ?
The machine that is connected to the console is being accessed over RDP ?
11-11-2015 02:18 PM
Hi Hassan,
Good day,
I too faced the same problem and i tried to download Hyerterminal - there too i faced the same problem.
The system i was using was having OS:Win 2008 R2 x64
Afterwards i tried with a Laptop with Win7 and it worked !
I am not sure at all on the intricacies of this but it did work for me.
Can you please let me know what OS are you using.
Regards,
Ruchit.
03-31-2017 11:50 AM
did you solve this issue ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide