×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

UCCX upgrading problem "does not match any filter pattern"

Unanswered Question
Jul 3rd, 2014
User Badges:

 

I am upgrading from UCCX on vm version 8.5.1.10000-37 to version 9.0.2.10000-71 and im getting the invalid upgrade.  Name does not match any filter pattern.  I am seeking to solve that problem and I got the information that I have to upload the "cop file" before do upgrade. Below the cop file that I already tried to upload.

1. ciscouccx.refresh_upgrade_v1.1.cop.sgn

2. ciscouccx.refresh_upgrade_v1.2.cop.sgn

 

But when I try the 2 points above, I always get the error message :


***** ERROR ***** ERROR ***** ERROR ***** ERROR ***** ERROR ***** ERROR ***** ERROR ***** ERROR

***** ERROR *****

Critical error during installation of cop ciscouccx.refresh_upgrade_v1.1.cop

 ERROR: This cop file is not applicable to this version (8.5.1.10000-37). This cop file is

intended to be installed only on the following versions UCCX 802 SU4 (8.0.2.11005-20) and 851

SU3 (8.5.1.11003-32)

***** ERROR ***** ERROR ***** ERROR ***** ERROR ***** ERROR ***** ERROR ***** ERROR ***** ERROR

***** ERROR *****

 

Anyone please kindly help me to solve my issue so that I can upgrade my CCX :)

 

regards,
Taufik

 

Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jonathan Schulenberg Thu, 07/03/2014 - 05:15
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

The error message tells you how to solve this: first upgrade to 8.5(1)SU3 or SU4. The 9.0(2) release notes also state this:

 Ensure that you are on Version 8.0(2)SU4 or 8.5(1)SU3 or 8.5(1)SU4 to apply the COP patch file.

If you are running on a lower version, you must upgrade to 8.0(2)SU4 or 8.5(1)SU3 or 8.5(1)SU4

and apply the COP patch file later.

 

You'll need to download and install this file before running the refresh COP file: UCSInstall_UCCX_8_5_1_UCOS_8.5.1.11004-25.sgn.iso

mtaufik_89 Thu, 07/03/2014 - 20:32
User Badges:

Hi Jonathan,

 

Thanks for your response. It's a great answer for me. I will do your advice to try solve my problem.

Thank You.

 

regards,
Taufik

d-graziosi Fri, 11/06/2015 - 04:49
User Badges:

I had the same problem.  I installed the filt ciscouccx.refresh_upgrade_v1.6.cop.sgn and then it was able to find the version 10 install file.

Actions

This Discussion