cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2527
Views
0
Helpful
3
Replies

RV325 w/Multiple Outside IP Addresses and Multiple Mail Servers

Gary Cosgrove
Level 1
Level 1

I'm moving a client from a ISA500 which "appeared" to be easier to setup Port Forwarding from multiple outside IP addresses to 2 different internal mail servers.

I'm confused about how to setup this same configuration on a RV325. Port Range forwarding has fewer options than I'm used to.

Any help would be appreciated.

Thanks.

3 Replies 3

rockrobi
Level 1
Level 1

Hello!

Have you checked out this article entitled, Port Forwarding and Port Triggering on RV320 and RV325 VPN Router Series?

Link to article here:

http://sbkb.cisco.com/CiscoSB/ukp.aspx?login=1&pid=2&app=search&vw=1&articleid=4159

I hope that helps with what you are trying to do.

Please contact me if you have any questions.

Thanks,

Rocket

 

I have seen that article, but it doesn't address multiple public IP (outside) addresses going to different private (internal) addresses.

 

IE: mail.abc.com (port 25) coming in on 1.1.1.1 going to 192.168.1.1 and mail.def.com (port 25) coming in on 1.1.1.2 going to 192.168.1.2.

Net_Connect473
Level 1
Level 1

If you want to enable port-forwarding from multiple outside IP addresses to multiple internal IP address destinations, you need to follow the steps I outlined here:

 

https://supportforums.cisco.com/discussion/12216481/rv320-port-forwarding-specific-wan-ip

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: