rus-admin Mon, 07/07/2014 - 20:26
User Badges:

 NAT is a layer 3/4 of  OSI. MAC ID is an address of layer 2. These will not work together. You can associate fixed  IP address and MAC in ARP table and use as usually NAT:

 

arp 192.168.0.254 1234.1234.1234 arpaip access list extended NAT_SRC permit ip host 192.168.0.254 anyip nat inside source list NAT_SRC interface GigabitEthernet0/0 overload

 

Actions

This Discussion