07-16-2014 02:29 PM - edited 07-05-2021 01:14 AM
I have a 5508 running 7.6.120.
I want to be able to create an RF profile for different countries and hence want to set the DCA to their appropriate channels.
In version 7.5 it looks like that option is there, sub letter f-i:
Looking at this config guide as well as the actual controller the options for DCA are now gone:
Any idea why this would be removed or way to do it in the CLI?
07-18-2014 10:41 AM
Hello Johyeh,
You may find it here: http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_01111110.html#ID351
under Configuring Dynamic Channel Assignment (GUI) Tab.
Hope that helps.
07-18-2014 12:41 PM
Hello Moin,
Thanks for the link.
Those settings are for the frequency as a whole. I want to be able to change the DCA settings per RF group so that I have different channel listings for APs in different countries.
-John
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: