×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Migrating all AP's to FlexConnect

Answered Question
Jul 23rd, 2014
User Badges:

I have about 60 AP's connected to my WLAN controller and want to migrate these to Flexconnect.  Do I have to manually changed each AP individually to FlexConnect or is there a way on the controller to configure them all in one easy way?  I plan to establish new SSID's that will be used via FlexConnect and keep the two existing SSID's as central switched until all users are migrated to the new SSID's.

Thank you.

Correct Answer by Stephen Rodriguez about 3 years 3 weeks ago

Unless you have a 7510 you can use the auto convert commad

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/command-ref...

 

if you have a 5508 or other, than you will need to do each one manually.

But you can script it:

config ap mode flexconnect < ap name >

 

HTH,

Steve

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion