How to configure VRF-Lite on Cisco 4500-X

Answered Question
Jul 28th, 2014
User Badges:

Hi,

I've got two cisco 4500-X that I use in VSS mode. I'm trying to configure VRF-Lite but when I enter "ip vrf VRF1" in conf term mode, I get this :

"% Feature is no supported"

Does anyone have a solution ?

Thank you !

P.S. my IOS version is 3.04.04.SG ipbase

Correct Answer by Rolf Fischer about 3 years 2 weeks ago

Hi,

I guess you'll need the Enterprise Services image.

Link: Release Notes for the Catalyst 4500X Switch, Cisco IOS XE 3.4.xSG

"The Enterprise Services image supports all Cisco Catalyst 4500-X Series software features based on Cisco IOS Software, including enhanced routing.

(...)

The IP Base image does not support enhanced routing features such as BGP, Intermediate System-to-Intermediate System (IS-IS), Internetwork Packet Exchange (IPX), AppleTalk, Virtual Routing Forwarding (VRF-lite), and policy-based routing (PBR)."

 

HTH

Rolf

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rolf Fischer Mon, 07/28/2014 - 08:27
User Badges:
  • Blue, 1500 points or more

Hi,

I guess you'll need the Enterprise Services image.

Link: Release Notes for the Catalyst 4500X Switch, Cisco IOS XE 3.4.xSG

"The Enterprise Services image supports all Cisco Catalyst 4500-X Series software features based on Cisco IOS Software, including enhanced routing.

(...)

The IP Base image does not support enhanced routing features such as BGP, Intermediate System-to-Intermediate System (IS-IS), Internetwork Packet Exchange (IPX), AppleTalk, Virtual Routing Forwarding (VRF-lite), and policy-based routing (PBR)."

 

HTH

Rolf

Actions

This Discussion