×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Filter RADIUS Attributes transmitted by WLC?

Unanswered Question
Aug 4th, 2014
User Badges:
  • Silver, 250 points or more

Afternoon all,

I've got an 8510 on the latest 7.6.120.0 software and I have a standard WPA2/802.1x Wireless LAN.  When Users authenticate we send their traffic off to a RADIUS Server, but when we do, the WLC includes all sorts of superfluous RADIUS attributes in the request (various things like default VLAN ID and all sorts of Cisco Airespace bits)

The RADIUS Server we're using can't filter these attributes out, so I'd like to find a way of having the WLC not send them in the first place...  Any suggestions?

Cheers,

Richard

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rasika Nayanajith Tue, 08/05/2014 - 13:17
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Wireless

Hi Richard,

As far as I know you cannot do anything on WLC to stop this. 

Did you speak to TAC and ask about this ? Not sure any hidden commands to do this though.

HTH

Rasika

**** Pls rate all useful responses ****

Actions

This Discussion

Related Content

 

 

Trending Topics - Security & Network