Cisco phone registering on Empty CME flash, and upgrade issue

ofekagmon · ‎08-04-2014

Hello,

I have two issues:

1. I have a CME that had a lot of files on it and Cisco phones were registering with sccp files.

I saved his flash and cleared it. now there is only the .bin file and NO sccp files.

How is it possible that the phones I connect to the CME still registering with sccp files? aren't the phones taking the files from the CME every time??

2. I have two 7942 IP phones with the files sccp42.8-3-2S and sccp42.8-4-1S.

I want to upgrade them to be working in SIP protocol.

how should I do it? to what file should I upgrade?

CME version is 8.6

thanks a lot!

Tagir Temirgaliyev · ‎08-05-2014

1. phones NOT taking the files from the CME every time. only when in flash latest firmware

2. cmterm-7942_7962-sip.9-3-1SR4-1.cop.sgn

do not forget rate post

michael o'nan · ‎08-25-2014

What do you mean by save and clear flash? How are you viewing flash? If I'm not mistaken show flash will show the .bin file and dir flash: will show all the phone files.