×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CUCM 9.1.2: Cannot call from Corporate Directory

Answered Question
Aug 7th, 2014
User Badges:

Hello,

We have a CUCM 9.1.2.

The IP phone can access the Corporate Directory, We can make search usin the first and last name. But cannot call the finded user when pressing the button Dial.

And also When pressin the edit dial, it is blank.

 

We've tested also with a CIPC and still doesn't work.

We've make a search by Number but no result.

I send in attach the result of the search.

What should be the reason, and is there any solution?

Regards,

Antra

Correct Answer by islam.kamal about 3 years 1 week ago

Hi

Try this for one of end users , go to user management - end user - select one of users - make sure from first and last name , write down the DN of this user at  "telephone number" - save. Then try to search for this user and dial using on phones which able to find names not on CIPC .

 

Thanks

please rate all useful information

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
Correct Answer
islam.kamal Thu, 08/07/2014 - 05:53
User Badges:
  • Red, 2250 points or more

Hi

Try this for one of end users , go to user management - end user - select one of users - make sure from first and last name , write down the DN of this user at  "telephone number" - save. Then try to search for this user and dial using on phones which able to find names not on CIPC .

 

Thanks

please rate all useful information

Ayodeji Okanlawon Thu, 08/07/2014 - 07:23
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

What type of directory integration is this? LDAP or just UDS (CUCM). WHen you do a search of the end users in cucm, do you see their details?

 

Jaime Valencia Thu, 08/07/2014 - 07:38
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Does your users have DNs configured in the directory??

If not, there's your problem.

iantra123 Thu, 08/07/2014 - 23:53
User Badges:

uses have DNs configured.

The have bee configured as primary Extension.

Cisco should develop the scrip by adding a choice between "Telephone number" and "Primary Extension", on the application service.

 

Actions

This Discussion

Related Content