×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Caller ID on SIP Trunk

Unanswered Question
Aug 17th, 2014
User Badges:

Hi,

 

We have two call manager cluster one is 7.0 and other one is 10.0

Both are connected by SIP trunk, But when someone from 7.0 calls a phone on 10.0 only number is dispalyed.

I also want name to be displayed along with number.Any idea how to enable this feature

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Sun, 08/17/2014 - 19:47
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

We only recommend sip trunks for CUCM communication if all the servers are 8.6 and above, if there is a server below 8.6, we recommend the old non-GK ICT

Puneet Kohli Sun, 08/17/2014 - 22:12
User Badges:

So this feature will not work...

Actually we are migrating to 10.x but there are number of sites ..Till then we have some sites in 7.x and some in 10.x

i was looking for some solution for caller id betwwen two

 

Actions

This Discussion