08-20-2014 09:23 AM - edited 07-05-2021 01:24 AM
08-20-2014 09:33 AM
May I know the reason why you down graded? Is other function of AP is workimg fine?
08-20-2014 09:45 AM
09-01-2014 02:23 AM
Hi,
I think you want to set AP as Repeater/Bridge.
There are porblems but not always with GUI. Its alwayas good to configure Autonomous AP via CLI this is the best way.
If you need the config guide, check this:
http://rscciew.wordpress.com/2014/05/24/single-ssid-configuration-on-autonomous-ap/
http://rscciew.wordpress.com/2014/05/24/multiple-ssid-configurations-on-autonomous-ap/
any more question then please write here.
Regards
Dont forget to rate helpful posts
07-02-2015 04:25 PM
hi,
now i have a problem : cannot show all clients by mac add and ip access my AP 1242 AG-A-K9 .
Can you help me how to config by web interfaces , please email for me that hoaithanhdo@gmail.com or thanh.do@samsung.com
thanks so much !
08-31-2014 09:56 AM
right i have found out why it was not working it was the web interface i was using but now i have a new problem and this is what i get when i try and set it as a Repeater after i have use the Express Security page to create unique SSID as it says in the Configuration Guide and saved it i then try to set it as a Repeater and get
---------------------------
Message from webpage
ERROR:
'Set Infrastructure SSID' must be configured in order to set the 'Role in Radio Network' to the following roles:
- 'Repeater'
- 'Access Point(Fallback to Repeater)'
- 'Non-Root Bridge'
- 'Non-Root Bridge with Wireless Clients'
(See Security>SSID Manager page).
any help please
09-16-2014 04:42 PM
Please refer:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/68005-wlan-connect.html#conf1
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-3_7_JA/configuration/guide/i1237sc/s37frst.html#wp1121933
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide