×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

%SW_LEVEL-6-RESULT: Operational redundancy mode is UNKNOWN, due to software license-level mismatch at ACTIVE and STANDBY.

Unanswered Question
Aug 20th, 2014
User Badges:

I have two 4500x setup with vss, and working.

i do however get the following messages during boot up:

%SW_LEVEL-6-RESULT: Operational redundancy mode is UNKNOWN, due to software license-level mismatch at ACTIVE and STANDBY.

 

Module name        Image level  Priority  Configured  Valid license
--------------------------------------------------------------------
WS-C4500X-16       entservices  1         NO          entservices
                   ipbase       2         NO          ipbase

Module Name     Role           Current Level     Reboot Level
--------------------------------------------------------------------
WS-C4500X-16    Active         entservices       entservices


800_1stSt#dir slavebootflash:
Directory of slavebootflash:/

16162  -rw-   122470656   Jul 8 2014 17:22:17 +00:00  cat4500e-universal.SPA.03.04.04.SG.151-2.SG4.bin
16163  -rw-        4813  Aug 20 2014 07:46:48 +00:00  startup-config.converted_vs-20140820-074112
16164  -rw-        6504  Aug 20 2014 11:44:49 +00:00  startup-config.saved_vs-20140820-114449

1692037120 bytes total (1569308672 bytes free)
800_1stSt#dir
Directory of bootflash:/

95042  -rw-   122470656   Jul 8 2014 17:24:14 +00:00  cat4500e-universal.SPA.03.04.04.SG.151-2.SG4.bin
95043  -rw-        4922  Aug 20 2014 07:27:28 +00:00  startup-config.converted_vs-20140820-072717
95044  -rw-        4922  Aug 20 2014 07:52:28 +00:00  startup-config.saved_vs-20140820-075228

 

how do i get both to entservices level?

 

thanks

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion