cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
250
Views
0
Helpful
1
Replies

apple ichat on different network segments does not work

 

Hi,

End users can not communícate with Apple ichat, when Mac are  in differentes network segment.

I applied the following commands in sw core but no success.

 

any recommendation?

 

 

 

ip multicast-routing   --->>> I added this command

 

nterface Vlan103
 description 3er_Piso
 ip address 192.178.3.1 255.255.255.0
 ip pim dense-mode   -------------> I added this command
!
interface Vlan104
 description 4to_Piso
 ip address 192.178.4.1 255.255.255.0
 ip pim dense-mode  --------------> I added this command
!
interface Vlan105
 description 5to_Piso
 ip address 192.178.5.1 255.255.255.0
 ip pim dense-mode    -------------------->   I added this command
!

 

 

1 Reply 1

Bruno Rangel
Spotlight
Spotlight

I see that is an old post, so you get it resolved?

I have the same issue

Cheers
Bruno Rangel
Please remember to rate helpful responses using the star bellow and identify helpful or correct answers
Review Cisco Networking products for a $25 gift card