09-01-2014 03:35 PM - edited 03-19-2019 08:33 AM
Hi everyone,
I am trying to install Unity Connection 7.1.5b or 8.0(3a) as a first step before upgrade to 10.5; I am using UCS C220 M3 SFF, VMWare Sphere ESXi 5.5, using OVA from Cisco, but I am getting the following errors each time:
Has anyone has fixed this error before?
Be great to get some advice.
Cheers
Solved! Go to Solution.
09-02-2014 06:32 AM
Hi Alberto.
Which template did you downloaded?
Check the network adapter configured on VM ad if E1000 , change it to Felx.
This caused me a similar issue while installed cucm 8.5
HTH
Regards
Carlo
09-01-2014 03:36 PM
09-02-2014 05:48 AM
Hi,
I have never faced this issue.But the attached snapshot points to Ethernet auto-negotiation issue.
Did u check the settings on switch?
regds,
aman
09-02-2014 06:32 AM
Hi Alberto.
Which template did you downloaded?
Check the network adapter configured on VM ad if E1000 , change it to Felx.
This caused me a similar issue while installed cucm 8.5
HTH
Regards
Carlo
09-03-2014 09:21 AM
Hi!
Problem solved, I changed the network adapter type from VMXNET3 to E1000 just like Carlo recommended.
I was able to install CUC 7.1(5b) in VM
cheers
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: