×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

6to4 NAT-PT in 3560X

Answered Question
Sep 4th, 2014
User Badges:

Hi all.

 

I know not supported NAT in 3560X.

But, I have one question.

 

Can I use the 6to4 NAT-PT in 3560X?

I think, 3560X is not supported NAT-PT...

 

Thanks.

Correct Answer by InayathUlla Sharieff about 2 years 11 months ago

Its not supported on 3560( NAT/NAT-PT not supported on this platform.)..

We do not support NAT on the Cat3560k switches.  Features such as NAT will
require hardware support in the switches and not available in the
current generation of products

 

Ref:

http://www.cisco.com/c/en/us/support/docs/ip/network-address-translation...


Also, you can cross check this on Feature navigator:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

 

HTh

Regards

Inayath

*Plz rate all usefull posts.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
InayathUlla Sharieff Thu, 09/04/2014 - 22:01
User Badges:
  • Cisco Employee,

Its not supported on 3560( NAT/NAT-PT not supported on this platform.)..

We do not support NAT on the Cat3560k switches.  Features such as NAT will
require hardware support in the switches and not available in the
current generation of products

 

Ref:

http://www.cisco.com/c/en/us/support/docs/ip/network-address-translation...


Also, you can cross check this on Feature navigator:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

 

HTh

Regards

Inayath

*Plz rate all usefull posts.

Actions

This Discussion

Related Content