09-04-2014 07:30 PM - edited 03-07-2019 08:38 PM
Hi all.
I know not supported NAT in 3560X.
But, I have one question.
Can I use the 6to4 NAT-PT in 3560X?
I think, 3560X is not supported NAT-PT...
Thanks.
Solved! Go to Solution.
09-04-2014 10:01 PM
Its not supported on 3560( NAT/NAT-PT not supported on this platform.)..
We do not support NAT on the Cat3560k switches. Features such as NAT will
require hardware support in the switches and not available in the
current generation of products
Ref:
http://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/29283-166.html
Also, you can cross check this on Feature navigator:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
HTh
Regards
Inayath
*Plz rate all usefull posts.
09-04-2014 10:01 PM
Its not supported on 3560( NAT/NAT-PT not supported on this platform.)..
We do not support NAT on the Cat3560k switches. Features such as NAT will
require hardware support in the switches and not available in the
current generation of products
Ref:
http://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/29283-166.html
Also, you can cross check this on Feature navigator:
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
HTh
Regards
Inayath
*Plz rate all usefull posts.
09-04-2014 11:09 PM
Thanks for your reply. :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide