×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How to configure Cisco ASA-SSM-CSC-10 module access to internet

Answered Question
Sep 5th, 2014
User Badges:

Dear Support,

 

I want to configure CSC module access to internet. Can you provide me sample configuration for it?

 

Best Regards,

 

 

Correct Answer by Juan Ponce Dominguez about 2 years 11 months ago

Hi,

 

You need to:

 

1. Connect the management port of the CSC to the internal network.

2. Session to the CSC: Session 1.

3. You will be prompted with basic network configuration.

4. Configure the ASA to divert the traffic to the CSC:

access-list csc deny extended deny ip host x.x.x.x any //where x.x.x.x is your CSC management IP.

access-list csc permit ip any any

!

 class-map CSC
  match access-list csc
!

policy-map global_policy
  class CSC
   csc fail-open

!

 

Then open a web browser and type https://x.x.x.x:8443 and you will get prompted with the CSC management portal where you can configure web filtering, smtp, pop3 or ftp policies.

 

 

JJ

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Juan Ponce Dominguez Sat, 09/06/2014 - 10:34
User Badges:
  • Cisco Employee,

Hi,

 

You need to:

 

1. Connect the management port of the CSC to the internal network.

2. Session to the CSC: Session 1.

3. You will be prompted with basic network configuration.

4. Configure the ASA to divert the traffic to the CSC:

access-list csc deny extended deny ip host x.x.x.x any //where x.x.x.x is your CSC management IP.

access-list csc permit ip any any

!

 class-map CSC
  match access-list csc
!

policy-map global_policy
  class CSC
   csc fail-open

!

 

Then open a web browser and type https://x.x.x.x:8443 and you will get prompted with the CSC management portal where you can configure web filtering, smtp, pop3 or ftp policies.

 

 

JJ

Actions

This Discussion