09-15-2014 05:00 AM - edited 03-17-2019 12:09 AM
hi all
i use gns3 to build simulation for my CCNA Voice
my question is that should i insert CME Ios to Router?
or one of the Enterprise IOS that router has sufficient and support full voice ?
Solved! Go to Solution.
09-15-2014 05:21 AM
Hi.
On GNS3 you can simulate 37XX router which can mount 12.4(25d) as latest release which has CME 7.0 built-in.
Adv enterprise contains that release of CME.
HTH
Regards
Carlo
09-15-2014 05:49 AM
Hi.
Adv IP services, merges SP and Security services.
With SP Services you have Data services + Voice
So yes you can download it
HTH
Regards
Carlo
09-15-2014 05:21 AM
Hi.
On GNS3 you can simulate 37XX router which can mount 12.4(25d) as latest release which has CME 7.0 built-in.
Adv enterprise contains that release of CME.
HTH
Regards
Carlo
09-15-2014 05:38 AM
could u please put me link for download 37xx ios router that you said?
09-15-2014 05:42 AM
Hi.
Here you are
http://software.cisco.com/download/release.html?mdfid=273764423&flowid=7314&softwareid=280805680&release=12.4.25d&relind=AVAILABLE&rellifecycle=MD&reltype=latest
HTH
Regards
Carlo
09-15-2014 05:43 AM
09-15-2014 05:49 AM
Hi.
Adv IP services, merges SP and Security services.
With SP Services you have Data services + Voice
So yes you can download it
HTH
Regards
Carlo
09-15-2014 05:54 AM
thnks
but which one i should download there are lot of ios?
09-15-2014 05:59 AM
Hi
Select the IOS with filename :
c3745-adventerprisek9_ivs-mz.124-25d.bin
It contains all you need
Regards
Carlo
09-16-2014 01:36 AM
again thanks alot carlo
09-16-2014 01:38 AM
Glad to help and thank you for nice rating.
Cheers
Carlo
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: