×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

configuring pstn trunk for multiples dial-peers

Unanswered Question
Sep 17th, 2014
User Badges:

Hi guys, i am currently have 5 ephones and i wanted to know if i can configure my UC560 to redirect incoming calls to each ephone with just 1 pstn line. The real question is, can each ephone have its owns pstn number? even when i have only 1 analog line conected to 1 fxo interface on my UC560?

 

 

regards

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Daniele Giordano Thu, 09/18/2014 - 10:03
User Badges:
  • Gold, 750 points or more

Hi, no way with FXS line. You must have at least an ISDN BRI or an E&M trunk.
If you don't have possibility to upgrade your telephone line you must configure an IVR on the UC: press 1 to speak with.... press 2 ... press 3... press 4 .... and press 5. One for each ephone.

Regards.

Actions

This Discussion