×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Rasika Nayanajith Wed, 09/24/2014 - 13:40
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 Wireless

Yes, you can use it as autonomous AP once you load that image on to it (eg ap3g2-k9w7-tar.153-3.JAB.tar)

Once you download image from cisco.com you can use one of the method described below to do the conversion (Lightweight to Autonomous)

1. http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/ 

2. http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/

 

HTH

Rasika

**** Pls rate all useful responses ****

Actions

This Discussion