×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Aman Soi Tue, 09/30/2014 - 10:15
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Hi,

You can simply run License Count Utility [downloadable from Cisco] .Run it on PC from where Publisher is reachable.

Once done, u will get an excel file consisting of used /unused DLUs , MAC address /IP address of Publsiger and count for CUWL /UCL users.

After u migrate to CUCM 10, share this file along with txt file generated from PLM to licensing@cisco.com to get the permanent license for users.

 

regds,

aman

ivansalazar Tue, 09/30/2014 - 12:37
User Badges:

Hi Aman,

Thanks fot the answer. But I'm looking forward to check wich part numbers are correct in order to have a migration without UCSS and Smartnet. So I wonderign if I should order:

R-CUWL-STD-K9

MIGE-UCM-UWL-STD

 

OR

R-UCL-UCM-MIG-K9

MIG-CUCM-USR-A

+

R-CUWL-STD-K9

MIGE-UCM-UWL-STD

 

Thanks,

Ivan

Aman Soi Wed, 10/01/2014 - 03:54
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Hi Ivan,

 

You need to place order for below since the users are different.Run the LCU to get the correct count.

R-UCL-UCM-MIG-K9

MIG-CUCM-USR-A

+

R-CUWL-STD-K9

MIGE-UCM-UWL-STD

 

regds,

aman

Actions

This Discussion