09-30-2014 09:40 AM - edited 03-19-2019 08:40 AM
Can I migrate from UCM v6.2 directly to CUWL (10) or we have to migrate them first to Enhanced UCL and then to UWL.??
09-30-2014 10:15 AM
Hi,
You can simply run License Count Utility [downloadable from Cisco] .Run it on PC from where Publisher is reachable.
Once done, u will get an excel file consisting of used /unused DLUs , MAC address /IP address of Publsiger and count for CUWL /UCL users.
After u migrate to CUCM 10, share this file along with txt file generated from PLM to licensing@cisco.com to get the permanent license for users.
regds,
aman
09-30-2014 12:37 PM
Hi Aman,
Thanks fot the answer. But I'm looking forward to check wich part numbers are correct in order to have a migration without UCSS and Smartnet. So I wonderign if I should order:
R-CUWL-STD-K9
MIGE-UCM-UWL-STD
OR
R-UCL-UCM-MIG-K9
MIG-CUCM-USR-A
+
R-CUWL-STD-K9
MIGE-UCM-UWL-STD
Thanks,
Ivan
10-01-2014 03:54 AM
Hi Ivan,
You need to place order for below since the users are different.Run the LCU to get the correct count.
R-UCL-UCM-MIG-K9
MIG-CUCM-USR-A
+
R-CUWL-STD-K9
MIGE-UCM-UWL-STD
regds,
aman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide