×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco Prime Infrastrastructure 2.1 HA Configuration

Unanswered Question
Oct 3rd, 2014
User Badges:

Hello All,

Having commissioned and tested failover between a pair of appliances I was rather surprised to discover that they do not share a VIP address.  From an operational support perspective this implies that I need to configure each host to accept snmp queries from two servers and double the number of snmp trap receivers to cater for instances where the Primary appliance is out of service.  This implies that the network is having to cope with twice the volume of snmp udp 162 traps and alerts.  I dare not even think about syslogging!

Hopefully, I've missed something, but how do fellow community members handle this eventuality?

Thanks in anticipation

Michael

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
AFROJ AHMAD Fri, 10/03/2014 - 04:27
User Badges:
  • Cisco Employee,

Hi Michael,

 

I understand your concern , I have heard similar kind of query before. but this how it has to be implemented.

we need to have traps send to both the servers though one server is Online at one time :(

otherwise , we have to take the pain of doing this if in case fail over happened.

 

Thanks-

Afroz

****Ratings Encourages Contributors ****

Actions

This Discussion

Related Content