×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

port forwarding on Cisco RV016

Answered Question
Oct 7th, 2014
User Badges:

Hi

some one know how open a specific port on RV016?. I try different ways, but i dont get with the correct.

i have to open ports for the security cameras, and then i can see of outside of my LAN.

if it possible, can one of you, show me how do it please.

best regards

Paris Pérez

Correct Answer by V K Moorthy about 2 years 10 months ago

 

Hi,

if your accessing the security camera in LAN with port 80 ( considered ).

 

you need to configure the UPnp configuration under setup menu:

 

Add new service with name 'CAM1'  with internal port 80 and external port 81

and configure the UPnp by enabling see the page no:48 in below link.

http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv0xx/administrati...

 

 

 

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
V K Moorthy Tue, 10/07/2014 - 20:09
User Badges:
  • Bronze, 100 points or more

 

Hi,

if your accessing the security camera in LAN with port 80 ( considered ).

 

you need to configure the UPnp configuration under setup menu:

 

Add new service with name 'CAM1'  with internal port 80 and external port 81

and configure the UPnp by enabling see the page no:48 in below link.

http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv0xx/administrati...

 

 

 

Actions

This Discussion